|
|
Shop Power Tools ::
Milwaukee 6390-21 7-1/4-Inch 15-Amp Tilt-Lok Circular Saw
|
Our Price: Too low to display
List Price: $260.00
Sales Rank: #1255 (lower is better)
Availability: Usually ships in 24 hours
Manufacturer: Milwaukee
Avg. Customer Rating:  
|
|
|
|
|
|
|
Brand: Milwaukee
Color: NA
EAN: 0045242049585
Manufacturer: Milwaukee
Model: 6390-21
Shipping Weight (lbs): 18.03
|
|
|
Milwaukee 6390-21 7-1/4-Inch 15-Amp Tilt-Lok Circular Saw Features
|
- Features a powerful 15-amp, 5,800 rpm and 3-1/4-horsepower motor with spindle lock and quick-lock cord for quick field replacement
- The locking, tilting main handle adjusts for comfort
- Aircraft aluminum shoe and soft-grip handle
- Kit includes 6390-20 saw, blade, wrench, and case
- 13-3/4 inches; 10.4 pounds; 5-year warranty
|
|
|
Milwaukee 6390-21 7-1/4-Inch 15-Amp Tilt-Lok Circular Saw Description
|
Blade can bevel to 50 degrees and offers superior visibility and a clear sight line from either side Eight position cushioned top handle adjusts to any cutting application for the best ergonomic grip, maximizing comfort and control Helical steel gears, 22 amp switch, 120 volts AC/DC, 5800 RPM. 5/8" spindle and double insulated construction Lightweight 7-1/4" right blade saw with Milwaukee's exclusive Tilt-Lok™ main handle adjusts to the work for most comfortable work position and is the most revolutionary concept for circular saws in years Weighing in at 10.4 pounds and featuring a powerful Milwaukee built 15 amp motor, this saw provides 3.25 maximum horsepower and offers the best power to weight ratio in the industry
|
|
|
|
|
|
|
|
|
Milwaukee 6390-21 7-1/4-Inch 15-Amp Tilt-Lok Circular Saw customer reviews:
|
Super clean, accurate, and easy - nay - a pleasure to handle.
I am a guy who bought an old 1900 house and didn't know anything whatsoever about carpentry a couple of years ago, so my 'review' should be taken with that in mind. But after buying this place, we decided that new cabinets were essential and after going to Home Depot and seeing the overpriced junk they have there, I decided that even at my worst I could do better than that. I spent several months acquiring the tools necessary for cabinetry but given that my shop space is extremely tight, I was eventually faced with the dilemma of cutting down full sheets of 3/4" ply without the space to do so on my table saw. I did some reading and figured that the Eurekazone EZ-Smart system w/a good circular saw would be a good way to go and went about researching just which circ saw would best suit my needs. If you're like me, and you're researching the myriad options out there, and banging your head against the wall trying to decide which one to spend your hard-earned dough on, I honestly think your search is over. Without getting into a lot of elaborate detail, with a decent Freud blade and the EZ guide system, I'm cutting down 3/4" sheets of Armor Core cherry ply with NO, and I mean NO, tearout. Super, super, clean cuts, that are every bit as good as what I'm getting on my table saw. The only real disadvantage of the Circ saw rig compared to the Tablesaw is the setup time. The cut quality is every bit as good.
GREAT SAW
THIS SAW IS GREAT,GOOD BALANCE ,GREAT PRICE, WE USE IT 5-6 DAYS A WEEK EVERY DAY NO PROBLEMS.THE TILT LOCK IS A GREAT FEATURS.
Milwaukee 6390-21
Great saw, lots and lots of power! Quiet (relatively). Comfortable in hand, well balanced and reasonable weight. Looking for other Milwaukee tools now. Arrived well ahead of stated shipping time.
Milwaukee 6390-21 Saw
I like this one.
Saw rips and crosscuts very well in 3/4" treated exterior ply, quarter-sawn douglas fir and pine. Edges were true with a reasonably smooth finish from the supplied blade. The sole plate is very sturdy, was square as received, and had good sight-line working from a waist-high bench. The separate accessory guide installed tightly, was square and worked well. Various adjustments were easy and tightened positively. Sawdust ejection not a problem.
I downloaded the manual, which has excellent exploded-view parts/assy. detail. It appears to be true industrial grade.
No cons; just comments. Some of my house wiring dates to 1939, so I have to use care with the power demand that I don't overload a circuit. The Tilt-Lok is not easy, feeling notchy like it doesn't quite release. In-the-US support rep said that was normal, and I don't expect to use that feature much. It's loud compared to my tired 1962 Craftsman 6-1/2.
good circular saw
used it continuously for four months on a small project with no problems. Durable, not too heavy, no problems so far. Definitely recommend it for personal use on home projects.
|
|
|
|
|
Thanks for shopping at Shop Power Tools, please visit us again!
|
|
|
|
