|
|
Shop Power Tools ::
JET 710115K JWBS-14DX Deluxe 14-Inch 1-1/4 Horsepower Woodworking Bandsaw with Micro Adjustable Blade Guides, 115/230-Volt 1 Phase
|
Our Price: $749.99
List Price: $966.00
Your Save: $ 216.01 ( 22% )
Sales Rank: #4741 (lower is better)
Availability: Usually ships in 2 to 3 days
Manufacturer: JET
Avg. Customer Rating:  
|
|
|
|
|
|
|
Brand: Jet
EAN: 0662755503184
Manufacturer: JET
Model: 710115K
Shipping Weight (lbs): 1.2
|
|
|
JET 710115K JWBS-14DX Deluxe 14-Inch 1-1/4 Horsepower Woodworking Bandsaw with Micro Adjustable Blade Guides, 115/230-Volt 1 Phase Features
|
- 14-inch woodworking band saw with closed stand and 15 by 15-inch table
- 1-1/4-horsepower motor; micro-adjustable blade guides; quick-change tension release; 4-inch dust port
- Heavy-duty cast-iron and steel construction
- Includes band saw, closed stand, and 3/8-inches blade
- 68 by 26 by 19 inches; 120 pounds; 2-year limited warranty
|
|
|
JET 710115K JWBS-14DX Deluxe 14-Inch 1-1/4 Horsepower Woodworking Bandsaw with Micro Adjustable Blade Guides, 115/230-Volt 1 Phase Description
|
Features a rigid one-piece welded stand which requires no assembly. 1-1/4HP motor is totally enclosed and fan-cooled for long life. Completely prewired, features a unique quick connect motor-to-switch plug for easy setup. V-groove blade guide bar for consistent alignment. Handy quick blade tension release and blade tensioning scale. Upper and lower ball-bearing, micro-adjustable blade guides. Extra large 15" x 15" cast iron work table, offset for more work area in front of the blade. Includes 3/8" woodworking blade - six teeth per inch. 4" built-in dust port. Full 6" under-guide cutting capacity with 13-1/2" blade-to-frame capacity. Poly V-belt drive. Standard Equipment: Closed stand;4" dust port;3/8" bandsaw blade;Micro-adjustable guides;Quick blade tension release;Nine-spoke wheels.
|
|
|
|
|
|
|
|
|
JET 710115K JWBS-14DX Deluxe 14-Inch 1-1/4 Horsepower Woodworking Bandsaw with Micro Adjustable Blade Guides, 115/230-Volt 1 Phase customer reviews:
|
Don't have deliveried 
I initially bought my saw through Amazon. The first time there was delivery damage which Amazon responded to very quickly. The second delivery was also damaged. Again Amazon took back the damaged unit and credited my account very promply but declined to try again. Both times the base was damaged. It is not packed as well as the other part of the machine and gets bent and damaged. I went to Woodcrafters and paid a little more but the machine was perfect. I bought it with all the add on's and was able to assemble the machine and install the add on's by my self but it was touch and go. I would definitly recommend having another pair of hands or rather strong backs when lifting the band saw onto the base. I love the machine but not the delivery problems although Amazon did stand behind it product without any hassles.
JET 7110115K JWBS-14DX Bandsaw
Received on time in perfect condition with all parts. Some difficulty with alignment of drive pulley/motor adjustment. Some cussing was required. Blade supplied was of low quality as expected. I recommend not ever installing the blade provided to avoid temporarily having a bad impression of the saw. Micro adjustable guides work well and fence is a plus. Fence back-side adjustment is a little hairy to get just right, but worth the time to allow smooth side-to-side movement of the fence. Saw runs smooth and performs as advertised. Blade tension release is very nice and helps with blade change time. Blade tension gauge is useful and readable. Hinged doors are great. Set-up instructions are well written.
Jet JWBS-14DX Band Saw
Great band saw. A lot of power comes out of the 1-1/4 HP motor. I needed help attaching the upper portion of the saw - HEAVY. A very solid piece of equipment. No vibration.
Quality, performance are as expected
I've had this saw in service for about three months - home woodworking shop @ 4 or 5 evenings a week. Here's what I've determined: It vibrates with a 3/4 blade on it. But, I'm still tuning for that blade and am not ready to blame it on the saw. With a 1/4 blade it ran smoothly. It is a breeze to tune unless you put on the wide blade, and is pretty accurate right out of the box. On the other hand, with a 3/4 blade 3tpi, it will resaw and cut the hardest wood like it is butter. Lot of torque and power.
It does not have a tire brush, so it gets dirty undr the blade which leads to imbalance and vibration. You will need to install a homemade brush for a buck or two. This saw puts a ton of dust into the air if you don't put a dust control hose on it. It still puts a lot of sawdust out on the table and floor, even with a 650 cfm vacuum on it, exclusively. The saw i replaced had a different type of dust port and seemed to handle the sawdust better. Replacing blade is simple and quick, the doors stay open while you work on the blade instead of swinging shut on you like some other bandsaws. Accurate tilt on the table. Table locks down solid and true. It's quiet.
Ths only thing I don't like is the placement of the table tilt control knob. It's under the table, one on each side of the table. It is right in the way of the lower guides. In other words, you have to take the knob off to tune or vacuum the lower blade guide assembly.
I recommend the saw. It will do what it's advertised to do and then some. It's worth the bucks. Amazon delivery was fantastic and on time.
Update. I found that the Jet Premium blades that I was running dulled quickly and caused the problems with the 3/4 blade vibration. Likewise the 1/4 blade went south in a hurry. I replaced with a 1/2 10 tpi Timber Wolf blade. Smooth as silk. Don't scrimp on the blades.
Should have bought it sooner
I have had a Delta for many years but when Delta quit supporting the saw with repair parts I bought the Jet. Set up was super easy but you better have help lifting the saw onto the stand -it is heavy. A few minor adjustments for tensioning the balde and adjusting the guides and it was ready to make saw dust.
The only problem was a broken catch on the top door and a dent in that door caused by the broken catch. A call to Jet had both parts delivered by UPS in 2 days. This saw is very quiet and very accurate, dust collection is good if you use a quality collector - mine is a 1HP from Penn State. Attempted to use my shop vac -5HP- but it didn't perform well. Good quality blades are a must; I use Olsen All Pro, using a less expensive blade will cause you to replace them more often. If you need a saw this is the one to get.
|
|
|
|
|
Thanks for shopping at Shop Power Tools, please visit us again!
|
|
|
|
