Sales Rank: #30592 (lower is better)
Availability:
Manufacturer: WMH Tool Group
Avg. Customer Rating:
Brand: Jet EAN: 0662755519727 Manufacturer: WMH Tool Group Model: 708626RCK Dimensions (in): 37 x 20 x 72
JET 708626RCK DC-1100 1-1/2 Horsepower 1,100 CFM Canister Dust Collector with Remote, 115/230-Volt 1 Phase Features
Quick-connect collection bags with elastic band for easy installation--no straps required
Industrial-quality motors and construction stand up to years of wood chip and sawdust collection
Single-stage design for economical, quiet operation
Powerful single-phase and three-phase motors are permanently lubricated, totally enclosed, fan-cooled, and rated for continuous duty for unsurpassed durability and longevity
4- and 6-inch diameter dust inlets for optimal 1- or 2-hose (respectively) dust collection
Rewire to 230V I recently purchased the DC-1100C Canister Unit (without remote)and found the assembly very easy and was quite pleased with the quality of the product. However, I went to the supplied manual to make the necessary changes to operate the unit at 230V and upon removing the switch mechanism faceplate I did not see the wiring hook-up illustrated in the manual. At this point I assume that I must go one more step and go directly to the motor wiring to make the change (behind the switch mechanism). This would require cutting the nylon strap to gain access. I also assume that I should not make any changes to the On/Off switch wiring.
Need help/clarification.
Thanks Excellent If you can afford it then it is clearly worth it. I wish I bought it 2 years ago. I bought it without the remote but purchased remote separately from woodcraft. The ultimate dustbuster I found this machine to be all it is advertised to be. Assembly was easy, with clear instructions.
The machine operates like a charm. Once I connected it to my Table Saw, which had my older collector previously, it cleaned out the saw dust and chips my old machine would not collect with out my assistance.
The Jet machine sure has suckability! The noise level is amazingly quieter then my old 3/4/ horse collector. I recommend this machine for those who have a small basement type shop as I do.
Thanks Jet.
Jet 1100 dc I'm going on three years with this unit. It is connected to a Jet jointer, Jet cabinet saw and planer. I've also added another line to use it with shop vac attachments and to suck up the dust from sanders and routers. It's a two stage collector now (I added a 30 gal trash can with separator lid) which reduces the times I have to empty the bag on the DC. The plastic bags can be used over and over again if you have somewhere to empty them. I'm on my third bag in three years and that's just because they snagged a hole on something carrying it into the woods to dump the sawdust. The filter will get clogged with dust often and the crank won't clear the dust out completely. I've found that the best way to clean the fiter is to blow compressed air into the filter while rotating the handle while it's still on the unit. Then, leave it alone for a while so the dust settles. Finally, remove the filter and brush all the dust trapped in the collar into the bag. This method will keep it running good. The DC is powerful enough to accomodate two machines at once, at least in my shop, and is reasonably quiet especailly compared to a shop vac. The remote really makes the machine. I keep it clipped to my shop apron and can turn the DC on and off as I go. In fact, I really don't pay much attention to this machine. It just sits in the darker corner of the shop and does it's job. If it wasn't for the occasional emptying, I'd forget it was there and doing it's job! great collector with a small problem Overall this is a great product. I usually only run one tool at a time and this collector can easily handle it. The only problem that I have with it is that recently it has decided to turn itself on every so often( I'm guessing that there is a problem with the signal from the remote, but I'm not sure). I would definitely recommend going with a canister dust collector.
Thanks for shopping at Shop Power Tools, please visit us again!
