|
Our Price: $129.99
List Price: $460.00
Your Save: $ 330.01 ( 72% )
Sales Rank: #413 (lower is better)
Availability: N/A
Manufacturer: DEWALT
Avg. Customer Rating:  
|
|
|
|
|
|
|
Brand: DeWalt
EAN: 0028877462196
Manufacturer: DEWALT
Model: D51844R
Shipping Weight (lbs): 10
Dimensions (in): 20.25 x 18 x 6.88
|
|
|
Factory-Reconditioned DEWALT D51844R Round Head 2-inch to 3-1/2-inch Framing Nailer Features
|
- Factory reconditioned nailer provides up to 900 pounds/inch of driving force
- Holds up to 65 2- to 3.5-inch full round head nails
- Features magnesium housing and durable aluminum magazine construction
- Includes DeWalt safety glasses and bump action trigger
- Measures 12.75 inches in height; weighs 7.5 pounds
|
|
|
Factory-Reconditioned DEWALT D51844R Round Head 2-inch to 3-1/2-inch Framing Nailer Description
|
|
|
|
|
|
|
|
|
|
Factory-Reconditioned DEWALT D51844R Round Head 2-inch to 3-1/2-inch Framing Nailer customer reviews:
|
Framing nailer 
Received in what appeared to be like new condition. When attempting to use it, the
gun would not create enough pressure to completely sink the nail. Always left a 1/4
inch head, which needed to be finished off with a hammer. My compressor delivered 120#
of force. Had to return it to seller.
Disappointed, R. Rush
Works Great
I will never go back to a framing hammer. This tool arrived in new condition. If it wasn't listed as reconditioned, I would have not realized it was reconditioned. Just completed the rough framing on a 16'x24' shop and the nailer worked great. We had a couple of jams but they were probably caused by the nails and not the gun because the last few nails were broke apart. Be careful with this gun, it is very powerful, if you shoot a nail at an angle too close to the edge it will go sailing. I rated this a 4 because I am fairly new to framing nailers so I am cautious to compare to other brands. Great product and excellent value.
Wonderful!
Item looks brand new, performs perfect. Best deal on a framing nailer I could find!
Great deal
I bought this item to construct a large storage shed. I only purchased it because it was priced so favorably, otherwise I would have swung a hammer. It arrived looking brand new and I drove hundreds of nails with no problems at all. The only thing you will need is a male connector for the air hose, this is not supplied with the tool.
This is a very nice tool at a very nice price, I couldn't be happier.
Factory-Reconditioned DEWALT D51844R Round Head Framing Nailer
The nailer arrived and was as advertised. The price was a little higher than the cheap no name nailers, but well worth the extra money. I used the nailer to install Hardie plank siding using 2 1/2 inch nails. Since this application required flush nailing, I played with the settings and it ended up either too deep or above the surface. I then adjusted the air pressure and the depth adjustment and that came up with a good setting. The nailer seemed to jam if you let it get below about 4-5 nails. Keep the nailer fed, and jamming is eliminated. I used a PC pancake compressor and it kept up with me. I am not sure if a pro would require a higher capacity compressor.
All in all I am pretty happy with the nailer. I will use it in on continuation of the porch project where I build an Eon deck over the existing concrete floor.
|
|
|
|
|
Thanks for shopping at Shop Power Tools, please visit us again!
|
