
|
Our Price: $171.10
List Price: $570.00
Your Save: $ 398.90 ( 70% )
Sales Rank: #1743 (lower is better)
Availability: Usually ships in 24 hours
Manufacturer: Milwaukee
Avg. Customer Rating:     

|
|
|
|
|
|
|
Brand: Milwaukee EAN: 0045242061020 Manufacturer: Milwaukee Model: 7120-21 Shipping Weight (lbs): 10.2
|
|
|
Milwaukee 7120-21 3/4- to 1-3/4-Inch Coil Roofing Nailer Features
|
- Operating pressure min-70 PSI, Max-120 PSI; air consumption .08 ft3/cycles at 100 psi
- Fastener length minimum 0.75 inches and maximum 1.5 inches; fastener diameter 0.120 inches
- 120 nail magazine capacity
- 15 degree collation angle; 3/8 in. NPT air inlet
- 5-year limited warranty
|
|
|
Milwaukee 7120-21 3/4- to 1-3/4-Inch Coil Roofing Nailer Description
|
Milwaukee's Heavy-Duty Coil Roofing Nailer features an ultra lightweight magnesium housing to minimize fatigue. Its compact size offers greater maneuverability. The Load-N-Go magazine holds 120 galvanized wire collated nails from 3/4 in. to 1-3/4 in. length and .120 in. diameter. A magnet holds the nail in place making loading fast and efficient. The thick rubber guards minimize housing damage. The tool-free depth of drive protects from overdriving nails. The self-cleaning air filter extends life by preventing dirt and debris from entering the tool. The adjustable air deflector with muffler directs exhaust away from the work area and holds down the noise. The textured selectable trigger lets you move from sequential or contact actuation by simply turning a knob. A removable shingle guide assists in quick shingle alignment.
|
|
|
|
|
|
|
|
|
Milwaukee 7120-21 3/4- to 1-3/4-Inch Coil Roofing Nailer customer reviews:
|
An Awesome Nailer!      I bought this based on Amazon reviews. I was looking for a nailer for putting down cement board in my kitchen and soon putting down new roof. With its first thousand nails put in through 1/2" hardibacker board, I have to say this thing is surprisingly light and powerful. I compared it to my friend's $300 Hitachi, and he even had to admit that the Milwaukee had the Hitachi beat in every way that matters. The adjustable and removable shingle stop is a nice feature as well. I just can't find anything bad to say about this nailer, and it even comes with some cool sunglasses for working up on the roof.
works well      Bought this to help reroof my garage which is now complete. At first I had a terrible time with jamming - basically every other shot or two would not feed and I would have to dry fire to get the gun to cycle. Tried oil which helped but not for long. The shots that did go in were fine. After a while I turned up the pressure (to something around 100 psi - don't remember exactly) and the feed problems went away and the gun worked flawlessly. I had set the pressure on the low end at first because I did not want to overdrive the nails. The depth setting didn't seem to affect the depth as much as the way the gun was held - may be obvious to some but I learned that if I pressed the gun into the shingle throughout the shot, I tended to overdrive more nails. Holding the gun a little looser and going quickly from shot to shot resulted in flush nails. I have used other roofing nailers in the past and this one worked just as well or better and was less expensive.
great price, well built tool      I was looking for a Bostitch nailer when I found this one. I didn't know Milwaukee made air tools, but I knew their reputation with power tools. I expected the quality to be excellent, and was not disappointed. I really like the easy switch between single and multiple shots.
Very good nailer!      I used this nailer to install my roof last year. It worked flawlessly for all 18 square of shingles installed. It only jammed once and that was my own fault because I loaded the nails wrong.
I even dropped it off my two story house on to concrete twice and it still performed great.
Pros: Easy to load, doesn't jam, extremely durable.
Cons: Can't think of any.
Big Red      Another winner from Milwaukee. Seven squares went down with one miss, which was not the nailers fault. Hit a spike and bent the nail. Removed it from the gun and went right back to work. Light and with a good balance. It will match our green and orange nailers. Highly recommend it.
|
|
|
|
|
Thanks for shopping at Shop Power Tools, please visit us again!
|